DSP56300 Core Functional Blocks
Conditional ALU instructions
Software-controllable 24-bit, 48-bit, or 56-bit arithmetic support
Four 24-bit or 48-bit input general-purpose registers: X1, X0, Y1, and Y0
Six data ALU registers (A2, A1, A0, B2, B1, and B0) that are concatenated into two
general-purpose, 56-bit accumulators, A and B, accumulator shifters
Two data bus shifter/limiter circuits
1.6.1.1 Data ALU Registers
The data ALU registers are read or written over the X data bus and the Y data bus as 16- or 32-bit
operands. The source operands for the data ALU can be 16, 32, or 40 bits and always originate
from data ALU registers. The results of all data ALU operations are stored in an accumulator.
Data ALU operations are performed in two clock cycles in a pipeline so that a new instruction
can be initiated in every clock cycle, yielding an effective execution rate of one instruction per
clock cycle. The destination of every arithmetic operation can be a source operand for the
immediately following operation without penalty.
1.6.1.2 Multiplier-Accumulator (MAC)
The MAC unit comprises the main arithmetic processing unit of the DSP56300 core and
performs all of the calculations on data operands. For arithmetic instructions, the unit accepts as
many as three input operands and outputs one 56-bit result of the following form: extension:most
significant product:least significant product (EXT:MSP:LSP).
The multiplier executes 24-bit × 24-bit parallel, fractional multiplies between twos-complement
signed, unsigned, or mixed operands. The 48-bit product is right-justified and added to the 56-bit
contents of either the A or B accumulator. A 56-bit result can be stored as a 24-bit operand. The
LSP is either truncated or rounded into the MSP. Rounding is performed if specified.
1.6.2 Address Generation Unit (AGU)
The AGU performs the effective address calculations using integer arithmetic necessary to
address data operands in memory and contains the registers that generate the addresses. It
implements four types of arithmetic: linear, modulo, multiple wrap-around modulo, and
reverse-carry. The AGU operates in parallel with other chip resources to minimize
address-generation overhead.
The AGU is divided into halves, each with its own identical address ALU. Each address ALU has
four sets of register triplets, and each register triplet includes an address register, offset register,
and modifier register. Each contains a 24-bit full adder (called an offset adder). A second full
adder (called a modulo adder) adds the summed result of the first full adder to a modulo value
that is stored in its respective modifier register. A third full adder (called a reverse-carry adder) is
also provided. The offset adder and the reverse-carry adder work in parallel and share common
DSP56311 User’s Manual, Rev. 2
Freescale Semiconductor
1-7
相关PDF资料
DSPAUDIOEVMMB1E BOARD MOTHER DSP563XX
DSPIC30F2010 DEVELOPMENT KIT KIT DEV EMBEDDED C
DSTRM-KT-0181A DSTREAM DEBUG AND TRACE UNIT
DSUT1CSU SURGE SUPPR NETWORK W/GROUND
DTEL2 SURGE SUPPRESSOR PHONE RJ11/RJ45
DV003001 PROGRAMMER PICSTART PLUS 16C/17C
DV164035 MPLAB ICD3 IN-CIRC DEBUGGER
DV164039 KIT DEV PIC24FJ256DA210
相关代理商/技术参数
DSP56311EVMIG_D 制造商:未知厂家 制造商全称:未知厂家 功能描述:DSP56311EVMIG DSP56311EVM Sample Code
DSP56311EVMUM 制造商:未知厂家 制造商全称:未知厂家 功能描述:DSP56311 Evaluation Module Hardware Reference Manual
DSP56311FACT 制造商:未知厂家 制造商全称:未知厂家 功能描述:DSP56311 Higher performance programmable DSP for demanding voice and data applications
DSP56311UM 制造商:未知厂家 制造商全称:未知厂家 功能描述:DSP56311 24-Bit Digital Signal Processor Users Manual
DSP56311UMAD 制造商:未知厂家 制造商全称:未知厂家 功能描述:DSP56311 Users Manual Addendum
DSP56311VF150 功能描述:数字信号处理器和控制器 - DSP, DSC 150Mhz/300MMACS 150Mhz EFCOP RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
DSP56311VF150B1 功能描述:数字信号处理器和控制器 - DSP, DSC 24 BIT DSP RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
DSP56311VF150R2 功能描述:数字信号处理器和控制器 - DSP, DSC 24 BIT DSP RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT